High strength multi-purpose building adhesive based on solvent-free polymers that provide a durable and strong bond.

Uses: For bonding, skirting boards, panels, architraves, carpets, plasterboards, covings, carpet grippers, tiles.

Suitable bond on ceramics, metals, brick, concrete, uPVC. Do not use in situations where both surfaces are non-porous.

(e.g. metal/metal, plastic/plastic)

Surface Preparations: Application temperature +5°C to +40°C. All substrates must be clean, dry, and free of grease and dust.

Application instructions: Cut the tip of the cartridge taking care not to damage the thread.

Apply nozzle and cut cleanly at an angle of 45° with an opening slightly larger than the gap to be sealed.

Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.

Smooth down within 20 minutes of application using a welted spatula, piece of wood or wetted gloved finger.

Care should be taken at this point not to saturate the surface as this will delay drying.

Cleaning: Tools should be cleaned after use with water. Sealant can be cleaned with water and soap before curing.

Limitations: Not suitable for continues exposure to water.

Not suitable for PP, PE, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates.

CAUTION: Keep out of reach of children. Wash skin thoroughly after handling, Wear protective gloves/eye protection/face protection.

Dispose of contents/container in accordance with local regulation.

Safety data sheet available on request.

Bathe the eye with running water for 15 minutes.

If irritation persists seek medical attention